Club100 Member Upload Library

hex2do.bas

HEX2DO Windows executable compiled from free basic Converts an M100 ML program in Intel HEX format to a compact .DO program for easy transfer and running in M100. --------------------------------------------- To turn the source code into the windows executable, you need Freebasic. the command is simple- fbc -lang qb %1.bas ---------------------- How it works: Starting from an Assembly program, compile it into Intel HEX - SRC.HEX The ORG address of the binary should be remembered; you will need to CLEAR to that address in the M100 later. Run HEX2DO in the same directory provide the source file name SRC - HEX2DO will process this to produce SRC.DO SRC.DO is transferable over serial to the M100 as a basic program in .DO format. In the M100, clear to the ORG address, and then load/run SRC.DO

Steve Adolph

hex2do.exe

the executable....

Steve Adolph

bconv4.do

Universal number converter and memory inspector. All features of BCONV3 plus- +/- increments or decrements (value/pointer to memory) M - set to Memory inspection mode, <# XXXX> indicates content of memory cell, and value of memory cell. N - set to Number mode format: C XXXXX C YYYYY ZZZZZ where z=x*256+y, and C are the ascii characters for XXXXX and YYYYY. Basic program is 480 bytes long.

Steve Adolph

OLCONV.do

One liner: A universal base converter. Very verycompact version of BCONV. Supports bases 2, 10 and 16. Enter in any base, and convert to any base. Maximum value = 65535 decimal. Enter changes bases, delete clears the value. Basic program is 201 bytes. Entering value > 65535 decimal breaks it. Hit enter to get things rolling. O/W the same as BCONV1.

Steve Adolph

BCONV2.DO

Improved version of BCONV1. BCONV2 displays decimal and hex values in the following format: XXXXX YYYYY ZZZZZ where z=x*256+y. This is useful for basic coding since many times you need to look at a dual memory location to calculate a pointer. Again, very compact. Basic program is 315 bytes.

Steve Adolph

BCONV1.DO

A universal base converter. Very compact version of BCONV. Supports bases 2, 10 and 16. Enter in any base, and convert to any base. Maximum value = 65535 decimal. Enter changes bases, delete clears the value. Basic program is 261 bytes.

Steve Adolph

BCONV3.DO

Latest version of BCONV. Displays decimal values in the following format: C XXXXX C YYYYY ZZZZZ where z=x*256+y, and C are the ascii characters for XXXXX and YYYYY. The addition of ascii codes now allows easy conversion from numbers to characters. Basic code is 342 characters long.

Steve Adolph

bconv3.exe

BCONV3.EXE --> this is a freebasic compiled version of BCONV3.DO. It runs in windows. Previously posted version had a bug..sorry. Corrected.

Steve Adolph

BCONV.DO

base converter....I like this one because I wrote it for one, and it has some neat features...give it a try...it's quite handy. It's fancier than bconv1...bconv1 is smaller.

Steve Adolph

HEX2BIN.EXE

dos utility for converting intel hex files to binary files

Steve Adolph